Current Auto Crane Service Cranes Hydraulic Service Cranes Hydraulic

2019 Auto Crane Service Cranes Hydraulic HC-12

2019 Auto Crane Service Cranes Hydraulic HC-12

Swipe to View More

  • Year 2019
  • Make Auto Crane
  • Model Service Cranes Hydraulic
Shop Auto Crane Pre-Owned
Product Details Specifications Photos
2019 Auto Crane Service Cranes Hydraulic HC-12

2019 Auto Crane Service Cranes Hydraulic HC-12

  • Year 2019
  • Manufacturer Auto Crane
  • Model Name Service Cranes Hydraulic
  • Trim Name HC-12
  • Generic Type (Primary) Other Cranes - Mounted

2019 Auto Crane Service Cranes Hydraulic HC-12

Features may include:

  • Proportional control of multiple functions simultaneously and independently
  • Adjust any function anytime to a different speed, for total control over the load
  • Level sensors monitor the angle of the truck and crane with the NexStar FM remote system on a Titan® crane body
  • Prevents operation in unsafe, unlevel conditions
  • Automatic stop at 100% load capacity
  • Keeps people, equipment, and loads safer
  • Adjustable speed settings; from 25% to 100%
  • Enables fine tuning of speeds for total control over the load
  • The NexStar FM remote system receiver displays load-monitoring and diagnostic readouts in plain English
  • No codes to look-up or memorize; operator views precise percentage load capacity
  • NexStar available with either tethered or fully-featured wireless remote options
  • Your choice for preferred control method
  • Transmitter is IP66 rated and CE certified
  • Sealed and water protected for maximum durability
Requirements
  • Truck must be equipped with 772020-000 outriggers or equal
  • 29,000 GVWR minimum chassis requirement. (Does not include bodies or accessories)
  • Minimum 1,000,000 in-lbs. RBM
  • Engine tachometer and throttle control required for proper crane installation

Operational

Operating Conditions Rating: 85,000 ft-lb (9.68 t-m) | Single Line: 60 ft/min (18.3 m/min) | Boom Down: 22-26 seconds (full stroke of cylinder) | Boom Retract: 47-56 seconds (full stroke of cylinder)

Hydraulics

Maximum Pressure Requirements: 15 gpm (57 L/min) at 2,800 psi (193 bar)

Chassis

Chassis Class 7 (29,000 GVWR)

Dimensions

Dimensions Capacity: 6 ft (1.83 m) | Base Plate: 20.5"(0.52 m) x 24.5" (0.62 m) | Cable: 120 ft (36.6 m) of 7/16" (12.7 mm) aircraft quality cable
Length 30 ft (9.14 m) fully extended | Stowed Boom: 15' 9" (4.80 m) | Extended Boom: 30' (9.14 m)
Width 2' 3" (.68 m)
Height 3' 3" (.99 m)

Capacities

Features 12,000 lbs (5,443 kg)

Weights

Weight 3,140 lb (1,379 kg) | 3,200 lb (1,451 kg)

Features

Features Body: Titan 85

Warranty

Warranty 2 year

Product Photography