Cues Inc.

Information

• Standard platform capacity of 400 lbs
• VERSALIFT TruGuard™0 dielectric isolating system with right-hand single stick control. 
• Hydraulic platform rotator.
• Hydraulic dual-arm articulating jib pole and winch package for up to 1,000 lbs. capacity
• 360^o continuous rotation including slip rings
• Side-mounted telescopic upper boom allows low stowing of platform.
• Chassis insulating system 
• One set of hydraulic tool outlets with a pressure limit valve. The valve can be adjusted from 1000 to 2500 psi.
• Sub frame-mounted main A-frame outriggers with pivot feet, two control valves, and a selector valve.
• Outrigger boom interlock system for main outriggers
• Side-mounted closed heavy-duty one-step 24 in. X 30 in. X 42 in. fiberglass platform including platform liner and vinyl cover.
• Individual full pressure controls at the turret actuate all boom functions and is equipped with a selector valve to override upper controls
• 12 Volt DC backup pump providing power to all boom functions.
• Automatic throttle control.
• Auto boom latch for mounting on outer boom ELECTROGARD. The rotary auto boom latch works off the lift hydraulic pressure to open and close.
• Standard white urethane paint

Cab and chassis to the following specifications:

• Ford F-550 4x4 
• GVWR: 19,500 lbs. payload plus upgrade package.
• 7L 4V OHV Power Stroke V8 turbo diesel w/ Engine block heater
• 6-speed automatic transmission
• Snowplow prep package including dual alternators (Total 332-Amps)
• 88 limited-slip axle.
• Air conditioning.
• Radio: AM/FM stereo 
• HD vinyl 40/20/40 split bench seat
• Trailer brake controller
• Operator Commanded Regeneration (OCR)
• Rearview camera 
• Painted Oxford

  Dakota Bodies 132” long x 40” high x 94” wide service body including the following:

  • 30-inch tread plate platform extension
  • LED lighting package installed in tail shelf with additional cutouts for strobe lights
  • Cable access step at the rear and side access.
  • Two (2) chrome grab handles at side access and two (2) pool-type grab handles for the rear tail shelf.
  • Wheel chock storage with pendulum retainers and outrigger pad holders.
  • Master door lock hook and loop system on each door with two (2) spring-loaded door handles. Excludes 1^st vertical curbside
  • Grey Zolatone paint on the interior of compartments.
    • 40” High Street side compartments as follows
  • 1^st Vertical: Two (2) adjustable shelves with dividers and cutout for outrigger
  • 2^nd Vertical: Two (2) adjustable shelves with dividers
  • Horizontal: One (1) removable shelf with dividers
  • Rear Vertical: Two (2) adjustable shelves with dividers
  • Hot stick shelf with rear access door.
    • 40” High Curbside compartments as follows
  • 1^st Vertical: Two (2) adjustable shelves with dividers and cutout for outrigger
  • 2^nd Vertical: Gripstrut access steps to bed area with removable composite side gate.
  • Horizontal: One (1) adjustable shelf with dividers
  • Rear Vertical: Five (5) fixed material hooks 1-3-1

  Installation to include the following:

  • Install combo pintle hitch, D rings, and 7 prong trailer connector.
  • (2) amber strobe lights in the tail shelf and two (2) strobe lights in the front grill.
  • Grounding kit, park brake interlock system, backup alarm, and mud flaps.
  • Outrigger pads, wheel chocks, fire extinguisher, and 3 piece triangle reflector kit.
  • Test and certify per ANSI A92.2