CUES Non-Insulated 41ft Telescoping Aerial Device

ONE (1) New UTEM Model SkyTel UTLN41, Installed, Tested and Including:

· B ottom of platform height 36'9” / Working height 41'9” / Horizontal Reach 27' 9"

· High strength Aluminum inner boom providing maximum strength and durability.

· End mounted walk-in 24" x 24 x 42" fiberglass platform-350 lbs. capacity.

· Bucket mounted fully proportional upper controls with emergency stop.

· Master/slave hydraulic leveling, with upper & lower control to tilt for cleanout or rescue.

· Turret mounted lower controls including override.

· Engine start/stop control from the platform and lower controls.

· Non-continuous 540° rotation with a shear-ball rotation bearing.

· Emergency 12 V DC hydraulic system (full function).

· 120v outlet at platform.

· Maintenance free bearings at all pivot points.

· 3-gpm hydraulic system hydraulic power source provided by a belt driven clutch/pump.

· 15-gallon hydraulic oil reservoir built integral to the pedestal with filters and sight glass.

· Heavy duty torsion bar stabilization system (includes ballast as required).

· Mounting hardware, boom cradle. No ratchet type tie down strap needed.

· Two operator's manuals and two service manuals (in English).

· One (1) XL safety harness and decelerating lanyard.

· ANSI A92.2-2001 certification and data plate.

· Powder Coat paint process, White.


ONE (1) New Astoria 132 LP Service King Utility Body With The Following Features:

· 11’ long molded fiberglass side compartment construction with a fiberglass bulkhead between the compartments.

· 20" compartment depth X 39” High X 93” wide with a 53” bed width.

· 12ga. steel treadplate floor with 2” steel tube understructure.

· Reinforced double laminated compartment doors with a full length extruded aluminum drip rail.

· Polished stainless steel rotary paddle latches with heavy duty stainless steel hinges & strikers.

· Automotive Grade Bubble Door Gaskets and Stainless steel door latches.

· Rigid spring over rod door holders for the vertical doors.

· LED lighting to meet FMVSS 108 with flush mounted LED lights for stop, turn and back, all wiring in loom.

· Corrosion resistant fasteners w/ self-locking nuts.

· Aluminum rock guard on compartment fronts.

· Standard Shelving Package;

S1 Two (2) fiberglass adjustable divider shelves with 2-1/2” lip.

S2 Two (2) fiberglass adjustable divider shelves with 2-1/2” lip.

SH Open.

S3 One (1) fiberglass adjustable divider shelf with 2-1/2” lip.

C1 Two (2) fiberglass adjustable divider shelves with 2-1/2” lip. 2000 watt Dimension Inverter.

C2 Two (2) fiberglass adjustable divider shelves with 2-1/2” lip.

CH One (1) fiberglass adjustable divider shelf with 2-1/2” lip

C3 One (1) fiberglass adjustable divier shelf with 2-1/2" lip

· An exterior gel coat finish (White match the chassis), will be applied to the body exterior, and have a depth of .015" to .018" when cured so as to guard against scratches. The high gloss ISO/NPG gel coat will be provided with UV barriers to guard against premature fading.

· Non-skid finish on the compartment tops.

Options added to the standard body:

· 24" steel tread-plate rear tail-shelf extension, drop in wood tailboard, grip-strut step and grab handle.

· Wheel chock holder recessed into the rear bumper with two wheel chocks.

· Tow package multi-hitch style with trailer wiring.

· Dimension Inverter, 2000 watt, with auxiliary batteries and fused installation kit.

· 120 volt GFI protected outlet with wet cover, (rear of body curb side).

· Aluminum stone guards at the front of the body side packs.

Complete Installation Including:

· Mounting of aerial, body, engine pump drive system, hydraulic oil and hydraulic lines.

· Boom support no ratcheting tie-down strap required.

· Safety cone mounting at the front bumper.

· Spray line the body floor, compartment tops & tailshelf. (black non-skid).

· DOT kit, fire extinguisher, first aid kit & reflective triangle kit, back up alarm.

· Complete unit tested and certified to meet ANSI A92.2-2001.

· Operator safety & operational training. Approximately 2hrs.

Mounted On A New 2008 Ford F-550 4X2 Chassis Equipped With The Following Features:

· VIN# 1FDAF56R98EC00519

· GVWR 19,000 lb., Duel rear wheels, Cab to axle is 84 In.

· Power stroke 6.4 L turbo.

· Air conditioning system.

· TorqueShift automatic 5 speed transmission-PTO provision.

· Tow Command System.

· LT225/70RX 19.5 BSW XZE tires.

· 130 AMP alternator.

· Driver side air bag.

· 78 Amp heavy duty battery.

· AM/FM radio with clock

· Interior: vinyl bench seat

· Cab steps on both sides of the cab.

· F&R disc brakes with four wheel ABS

· S ingle fuel tank - 40 gallon capacity.

· Extended camper mirrors.

· Front tow hooks

· Painted code White.

Total Equipment Price, Installed & Tested, FOB Amherst NH: $75,280.00