-
12’ travel height
-
24” x 24” x 40” curb-side mounted bucket-350# platform capacity with cover.
-
Insulated Platform Liner for 24" x 24" x 40" Platform-Certified at 50 KV AC.
-
Working 75’ and a side reach of 44.9’ non-overcenter and 49.9 ' overcenter.
-
10’ in line elevator
-
Upper Controls: "Control-Plus" single stick controller - Non-metallic control handle
-
Dual hydraulic tool outlets at platform to accommodate two (2) open center hydraulic tools.
-
Platform Leveling provided by a leveling system utilizing chains and fiberglass rods.
-
Lower controls activate the lower boom, upper boom, and rotation.
-
Upper/lower control selector provides override of platform controls.
-
Lower Boom constructed of high strength steel rectangular steel tube
-
Lower boom articulation is from 0 degrees to 130 degrees.
-
Upper boom has an overcenter articulation of 245 degrees.
-
Boom Interlock: To operate the boom the outriggers must be extended.
-
Continuous & Unrestricted Rotation with self-locking worm gear rotation drive.
-
External mounted 35 gallon hydraulic tank with sight gauge, suction screen and shut off
-
Spin-on return line filter
-
Two sets of operation, maintenance, and replacement parts manuals.
-
Safety harness and lanyard with a built in 'D' ring lanyard attachment is provided.
-
12 volt auxiliary Let Down allows for the descent of the boom.
-
Hydraulic Platform Tilt At Lower Controls.
-
Insulated Engine Stop / Start controlled from platform
-
Two sets of Heavy Duty A-frame Outriggers with 13 " x 12 " swivel type stabilizer pads.
-
2-Sets of Outrigger Controls recessed at rear of truck each side.
-
Boom painted white.
